Science

Explained: How Swiss researchers pulled clean drinking water from thin air with no energy input – Firstpost


Access to potable or clean drinkable water is a major concern for a lot of areas. Because of ever-increasing pollution levels, global warming and rising sea levels, accessing clean drinking water is becoming extremely difficult for many communities, especially in developing and underdeveloped countries.

Explained How Swiss researchers pulled clean drinking water from thin air with no energy input

To counter that, a team of Swiss scientists and engineers have come up with a way to draw clean drinking water from thin air. The best thing about the new method that these engineers have come up with, is that it requires no energy or electricity input to work.

Communities living near the sea can desalinate seawater and make it potable. This process though requires a lot of energy. Areas far away from the sea or any major water body, rely on the atmosphere and local water bodies, which are drying up. If we’re talking about a developed and rich country, they condense atmospheric humidity through cooling and create artificial rains, which again, is an electricity-intensive solution.

In developing or underdeveloped nations, the only option is to rely on the rains, or on passive technologies such as using dew collecting foils, or water harvesting, both of which, come with their own set of challenges.

Researchers at ETH Zurich have developed a technology that, for the first time, allows them to harvest water 24 hours around the clock, with no energy input, even under the blazing sun. 

The new device essentially is made up of a specially coated glass pane, which both reflects solar radiation and also radiates away its own heat through the atmosphere to outer space. It is able to cool itself down to as much as 15 degrees Celsius below the ambient temperature.

Water vapour under the glass pane then condenses into water, which is then collected in tanks.

The scientists coated the glass with specially designed polymer and silver layers. This coating allows the pane to emit infrared radiation at a specific wavelength window to outer space, with no absorption by the atmosphere nor reflection back onto the pane. Because of this, this method does not contribute to global warming as well, unlike most other condensation-based water extracting solutions. 

Another key element of the device is the cone-shaped radiation shield. It largely deflects heat radiation from the atmosphere and shields the pane from incoming solar radiation. This allows the device to radiate the aforementioned heat outward and thus to self-cool, completely passively.

The scientists were able to show that, under ideal conditions, they could harvest up to 53 millilitres of water per square metre of pane surface, per hour. While it may seem very little, the theoretical limit that most other solar-based water extraction systems aim for, which by the way, contributes to the greenhouse effect and global warming, is 60 millilitres.





READ NEWS SOURCE

Leave a Reply

This website uses cookies. By continuing to use this site, you accept our use of cookies.